How to make gears in solidworks ?

Best answer: Navigate and Right click “Spur Gear” from the listed options and left click “Create Part.” The part should appear in the main editing window. 4. Change the options in the left hand column (titled “Configure Component”) to create the desired gear.

How do you draw a spur gear?

FAQ

How do I make two gears in SolidWorks?
To add a gear mate: Click Mate (Assembly toolbar) or Insert > Mate. In the PropertyManager, under Mechanical Mates, click Gear . Under Mate Selections, select the rotation axes on the two gears for Entities to Mate .

What are the steps to design a gear?

Clarify specifications and determine basic elements.
Design shapes of spur gears.
Check spur gear’s strength.
Design of peripheral structures of gears.
Executing the drawings of the parts related to the gears.

Is there a gear tool in SOLIDWORKS?
From the Windows Start menu, click All Programs > SOLIDWORKS version > SOLIDWORKS Tools > Toolbox Settings. From the Configure Hardware page, click GB, Power Transmission, and then click Gears.

What is required for gears to mesh?
In order for the gears to mesh, the space between the gear teeth of each gear, in other words the pitch (p) must be equal. The pitch of a gear indicates the size of the gear tooth, but because the pitch contains the circular constant π (3.1415…), it is not a convenient number.

See also How to cut in fusion 360 ?

How does gear mate work in Solidworks?
Gear mates force two components to rotate relative to one another about selected axes. Valid selections for the axis of rotation for gear mates include cylindrical and conical faces, axes, and linear edges. Also: You can mate any two components that you want to rotate relative to one another.

What is the gear ratio formula?
The gear ratio is calculated by dividing the output speed by the input speed (i= Ws/ We) or by dividing the number of teeth of the driving gear by the number of teeth of the driven gear (i= Ze/ Zs).

How do you draw involute gears in SolidWorks?

Select Tools / Equations…
In the Equation dialog change Angular equation units to Degrees.
Enter each of the above equations into the table into the Global category.
Select OK to exit the dialog.
Select Insert / Boss/Base / Extrude… to create a cylindrical gear blank.

How do you make a helical gear in SolidWorks?

Change the extrusion height and make it thicker.
Insert>>Feature>>Flex.
Choose flex type – Twisting and select the gear body as flex input.
Enter the triad angle for x axis as 90degree.
Enter flex angle(Helix angle) as 20degree. Click OK.
We have the Helical gear created.

See also How to export revit sheets to pdf ?

What are the types of gear?

Spur Gear. Gears having cylindrical pitch surfaces are called cylindrical gears.
Helical Gear. Helical gears are used with parallel shafts similar to spur gears and are cylindrical gears with winding tooth lines.
Gear Rack.
Bevel Gear.
Spiral Bevel Gear.
Screw Gear.
Miter Gear.
Worm Gear.

How do you draw meshing gears?

Step 1: Start by drawing a horizontal centre line for both gears.
Step 2: Draw a vertical centre line for the driver gear on the left.
Step 3: Calculate the pitch centre distance.
Step 4: Measure the centre of the driven gear from the centre of the driver gear.

How do you calculate gear size?
In short, divide the number of teeth on the gear by the diametral pitch of the gear to calculate its pitch diameter. The units of diametral pitch are 1/inches, so the units of the pitch diameter will be in inches. For a quick approximation, the pitch diameter is roughly in the center of the gear tooth.