CAD Softwares

Best answer: . In a part document, click Scale (Features toolbar) or Insert > Features > Scale . . Set options in the PropertyManager. . Click. The geometry of the…

Best answer: In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. The geometry of the model increases or decreases…

Best answer: To show bend lines in flat patterns, do one of the following: Click View > Hide/Show > Sketches. In the FeatureManager design tree, expand Flat-Pattern and Flat-Pattern( n…

Best answer: To get there go to Tools > Options > Document Properties . In the Detailing section, there are two options that need to be selected, ‘Cosmetic threads’ and…

Best answer: To show or hide hidden edges in the Drawing View Properties dialog box: Right-click the drawing view and select Properties. Select the Show Hidden Edges tab. Select a…

Best answer: on the Curves toolbar, or Insert > Curve > Projected. Use this selection to project a sketched curve onto a model face. , select the curve in the…

Best answer: Select the top view from view orientation of “Heads-up View Toolbar” or press “ctrl+5” then click Update Standard View button and choose the front view. A pop-up message…

Best answer: . In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify. . In the dialog box, do one of the following: Type…

Best answer: . In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify. . In the dialog box, do one of the following: Type…

Best answer: Click Rotate Component (Assembly toolbar) or Tools > Component > Rotate. The Rotate Component PropertyManager appears, and the pointer changes to . Select one or more components in…

Best answer: Rotates the model view in part and assembly documents. Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the…

Best answer: Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the middle mouse button. Press the arrow keys. Hold down…