How to scale an assembly in solidworks ?

Best answer:

1. . In a part document, click Scale (Features toolbar) or Insert > Features > Scale .
2. . Set options in the PropertyManager.
3. . Click. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

FAQ

How do I scale an entire Solidworks assembly?
Access the Scale feature (Insert > Features > Scale). Select all of the solid bodies in the part to be scaled – note you may need to access the Feature Manager and expand the Solid Bodies folder to select the bodies.

Can you change the scale on Solidworks?
You can change the scale of a drawing sheet by selecting a scale from a predefined list or specifying a custom scale. To change the scale of an existing drawing sheet: In the status bar, click Sheet Scale and click a scale. If there are annotations in the drawing sheet, specify options in the dialog box and click OK.

How do you scale all measurements in Solidworks?

1. Insert a design table from Insert > Tables > Design Table.
2. Leave all settings as default and click on the green checkbox.
3. A “Dimensions” window will pop up with a list of all dimensions used in the model, select them all and click on OK.
4. Edit the design table.

How do I scale an imported drawing in Solidworks?

1. In the status bar click Sheet Scale and click a scale.
2. Right-click the sheet and select Properties, then edit the values of Scale.

How do I change the scale of a drawing in SOLIDWORKS?
You can change the scale of a drawing sheet by selecting a scale from a predefined list or specifying a custom scale. To change the scale of an existing drawing sheet: In the status bar, click Sheet Scale and click a scale. If there are annotations in the drawing sheet, specify options in the dialog box and click OK.

How do you scale down a drawing in SOLIDWORKS?

1. In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify.
2. In the dialog box, under Scale About, select one of the following: Option. Description. Sketch origin.
3. Type a value for Factor, and press Enter. You cannot scale a sketch that has external references.
4. Click Close.

How do you change a ratio in SOLIDWORKS?

1. In the status bar click Sheet Scale and click a scale.
2. Right-click the sheet and select Properties, then edit the values of Scale.

How do you enlarge a scale drawing?
Projectors are an excellent way to scale drawings up. Opaque projectors can be used to project an image such as a drawing onto a larger surface. Simply trace over the projected image and your drawing is scaled up. Digital projectors are also a good way to enlarge drawings.

How do you change dimensions in SOLIDWORKS?
To change a dimension: Double-click a dimension. The Modify dialog box appears. Change the dimension value with the arrows, thumbwheel, mouse wheel, or by typing in the dimension box.

What is the scale command in Solidworks?
The Scale command allows the increase or decrease in geometry body size. For example, a scale factor of two would mean double the dimensions. It will scale the model using the three global coordinates x, y and z.

How do you scale an assembly in Solid Edge?

1. Once you have saved the original part.
2. In the blank part document select “Part Copy” which can be found in the Clipboard.
3. Select your part from the file location.
4. The Part Copy Parameters dialogue box appears.
5. Towards the bottom you will see where you can scale the part.

How do I reduce the size of a Solidworks assembly file?

1. Reducing size (Converting Solid-body to exterior surfaces only):
2. Importing Step file as graphics body:
3. Optimizing Step File in Top-Level Assembly.

How do you scale an entity in SOLIDWORKS?

1. In Edit Sketch mode click Scale Entities. (Sketch toolbar) or Tools > Sketch Tools > Scale.
2. In the PropertyManager, under Entities to Scale, select sketch entities for Sketch item or annotations.
3. Under Parameters: Click Base Point (Scale Point Defined) to set a Base point.
4. Click .

How do you scale a graphic in SOLIDWORKS?

1. Place the left end of the scale tool at one end of the picture.
2. Drag the right end of the scale tool to extend the length of the line.
3. In the Modify dialog box for dimensions, enter a value for the desired measurement and click .