How to make cone in solidworks ?
Best answer:
- . Click Solids > Draw > Cone (or type Cone).
- . Set an option for the cone’s base: Center point base: Click in the graphics area to specify a center point or type the 3D coordinates.
- . Set the cone height: Click in the graphics area or type a value. – or –
How do you make a rounded cone in SolidWorks?
FAQ
How do you make a cone in SolidWorks 2021?
- Click Solids > Draw > Cone (or type Cone).
- Set an option for the cone’s base: Center point base: Click in the graphics area to specify a center point or type the 3D coordinates. Click in the graphics area or type a value for radius.
- Set the cone height: Click in the graphics area or type a value. – or –
How do you model a funnel in SolidWorks?
- Step 1: Step 1: Open Part and Begin.
- Step 2: Step 2: Begin Sketch.
- Step 3: Step 3: Draw Center Axis.
- Step 4: Step 4: Begin Funnel Cross-Section.
- Step 5: Step 5a: Adding Dimensions.
- Step 6: Step 5b: Add Dimensions.
- Step 7: Step 5c: Finish Adding Dimensions.
How do you make a pyramid in Solidworks?
- Click Solids > Draw > Pyramid (or type Pyramid).
- Specify the center point of the base or enter an option: Edge: Lets you define the edge of the pyramid base by specifying edge endpoints.
- Specify the base radius or enter an option:
- Specify the height or enter an option:
How do you make a cone in 3D experience?
- Do one of the following to choose Cone ( ): On the ribbon, choose Draw 3D > Cone (in Facet Model Meshes). • On the menu, choose Draw > Facet Model Meshes > Cone.
- Specify the center of the base of the cone.
- Specify the radius or diameter.
- Specify the height.
How do you make a tapered hole in Solidworks?
- Visit the top menu bar on the upper right-hand side of your screen.
- Select Insert > Features > Advanced Hole.
- Select Near Side.
- Dimension the position of the hole in the Position tab of the Property Manager.
- Choose the first hole feature you want on your customized hole.
How do you draw a cylinder shape in Solidworks?To Draw a 3D Cylinder: In the horizontal menu bar at the top, click the button that shows a circle. In the drawing area, click the cursor once on the origin to drawing a circle. Drag the mouse and then click to create the desired circle.
How do you draw a hollow cylinder in Solidworks?
- Click Solid > Create > Create Sketch .
- Select the XZ plane to sketch on.
- Click Sketch > Create > Center Diameter Circle .
- Hover over the origin (or center) of the sketch.
- Click once to begin placing the circle.
- Drag the mouse away from the center to start sketching a circle.
- Click again to complete the circle.
How do you make a rectangle cone?Cut a rectangular piece of parchment paper in half diagonally. Your triangle will have a short side (A) a long side (B) and a 90 degree angle. The tip of the cone will be formed along the third side of the triangle, directly across from the 90 degree angle.